HideShow Navigation

Dash Bin 113 Litre (30 Gallon) Chemical Spill Kit

Dash Bin 113 Litre (30 Gallon) Chemical Spill Kit

113 Litres | 30 US Gallons* Polypropylene
Facts and figures

A rugged two wheeled, hinged lid bin

A highly portable wheeled bin with a hinged lid that is ideal for locations where a quantity of sorbents need to be taken to the site of a spill at a moments notice. The wheels are made from tough rubber and cannot puncture.

Spill kit’s contents include:

40 x Pads size 38 cm x 46 cm (15” x 18”)

The pads in this spill kit are medium weight sonic bonded meltblown polypropylene Chemical. They feature excellent wicking properties and sonic bond points that prevent stray fibres from becoming detached.

4 x Pillows size 23 cm x 38 cm (9" x 15")

These pillows feature a spun-bond outer surface with a super absorbent flake core.
This next generation absorbent will absorb and hold large quantities of aggressive, hazardous or unknown fluids.

3 x Socks size 8 cm x 1.2 m (3” x 4’)

These socks feature a spun-bond outer sleeve with a durable stitched seam. The core is a next generation absorbent that will recover aggressive and unknown spills. Durable plastic clips seal the sock at both ends.

4 x Waste Bags

These are made from a tough grade of polythene. There is also a cable tie supplied so that the waste can be secured safely.

1 pair of gloves

Waterproof gloves help to ensure safe handling of spilled substance.

1 pair of goggles

All-in one clear goggles provide eye protection from splashes.

1 guide book

An informative booklet that advises on spill recovery.

This spill kits feature a combination of pads and socks that will contain and recover a 113 litre spill of hazardous oil-based and water-based fluid as well as the essential equipment needed to handle the clean up process. Please note extra caution should be taken when dealing with hazardous or unknown spill types. 


113 Litre (30 US Gallons)

Recycled Content*

20* %










113 Litres | 30 US Gallons***

Base Fibre


  • Refill 10 pad packs are available for this kit.
  • Ensure that disposal of these used sorbents complies with all regulations.

29 CFR 1910.120(j)(1)(vii) ...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii) U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2) The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.

40 CFR 263.31 Transporters “must clean up any hazardous waste discharge that occurs during transportation.


113 Litre (30 US Gallons)

Suitable for

For recovering unknown, aggressive or hazardous fluids


We recommend this absorbent for recovering unknown or hazardous spills