HideShow Navigation
UT2127

Drain Seal®

Drain Seal®

Description
Application
Facts and figures
Notes
  • Reinforcing mesh is “sandwiched” between layers of polyurethane— increases durability and resistance to tearing.
  • Unique, urethane construction allows the pad to deform and seal off most drains — temporarily “seals” to any smooth surface.
  • A valuable addition to any emergency response plan, spill kit, SPCC, or storm water management program.
  • Unlike some alternative products, BOTH sides will quickly seal drains — there is no specified “top” or “bottom.”

Key Features

Easily installed in most drains. Simply lay the seal mat over the drain that requires covering.

Size

61 x 61 x 1 (24” x 24” x 0.75”)

Recycled Content*

0* %

Units/Case

1

Weight/Case**

3.5 kg (8.0 lbs)**

29CFR 1910.22(a)(2) “The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.”

29CFR 1910.120(j)(1)(vii) “… suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.” 



Size

61 x 61 x 1 (24” x 24” x 0.75”)

Suitable for

Recovering both oil and water based fluids at the same time

Recommended

We recommend this absorbent for recovering both oil and water outdoors