Here you'll find all our products

With a fabric weight of 165 gsm there are 200 pads in the bale, which is twice the number when compared to the heavier weight 286 gsm 100 pad count version, and as a results offers a product with the lowest cost per square metre fabric.

This Oil only Coldform2^TM pad is unique in the fact that one side is no-lint, and very durable and the other side is soft and absorbent. It combines some of the best features found in a laminated pad (no-lint & durability), while reducing the slip problem associated with double sided laminated sorbents. This pad is more absorbent than its meltblown counterpart. These features make this pad a great Coldform2^TM go-to product. 

Key Features

• Best option for absorbing oil-based liquids
• The sorbent is made up of two layers that are sonically welded together
• Made from 80% recycled/sustainable cellulose
• Top layer is made of a white, no-lint, durable spun-bond polypropylene
• Core/base layer is made from high-loft Coldform2^TM sustainable fibres
• Base layer is low-slip making this a great product for foot traffic
• Minimal lint
• Pads are perforated down their centre.

Because the top sheet is very durable and the bottom layer is low-slip this product makes a very good sorbent choice if foot traffic is expected, or when durability is needed. This Oil only product can be used indoors or outdoors but it is not recommended for use where large amounts of water are present.

• Avoid high-heat and Chemical applications.
• Fire retardant as per ASTM 726.
• Ensure that disposal of these sorbents complies with all regulations.